Fireclay Tile

ireclay Tile’s mission is to produce the most beautiful, durable ceramic products using sustainable manufacturing processes and recycled materials. We are innovators and actively engaged in developing new ceramic technologies while preserving “old world” methods.

Wahoo Decks

You can trust Wahoo Decks for quality and safety in all of our deck products. Our marine-grade aluminum can withstand some of natures harshest conditions because it is fire resistant, termite-proof, wont warp, crack, split or splinter and is unaffected by ...

Epic Metals Corporation

Exotic Hardwoods & Veneers

Exotic Hardwoods + Veneers, Inc. is a team of professionals dedicated to servicing the design community. We offer an extensive inventory of beautiful, high-quality veneer and lumber from around the world, including a large selection of both salvaged and 1 ...

Cireon

At capacity, a conventional 175W HID fixture is responsible for about 1400#'s of greenhouse gas emissions annually. The equivalent Cireon SSL is at 400#'s. This means that for each you replace with a Cireon SSL, you'll be adding two mature trees to the ...

Lunera Lighting

Lunera Lighting is a technology innovator leading the transformation of lighting from traditional fluorescent lighting to energy-efficient, dimmable, LEDs that produce soft, uniform light. It designs, manufactures, and markets high-performance LED lighting fixtures as a direct replacement for fluorescent fixtures commonly found in commercial buildings. The company has created new lighting solutions that improve the quality of light for building occupants, lower energy and operating costs for building owners, and support sustainable building design. Manufactured in the USA, Lunera’s products adhere to clean manufacturing standards and are particularly attractive to clients seeking LEED certification, since LED lighting substantially impacts LEED points in “green” buildings. The company is a firm believer in social responsibility and has made it part of their corporate philosophy.

Airius, LLC

Heat rises. We learned that in elementary school. However, it took a long time for someone to finally invent a cost-effective way to get the heat from the ceiling back to the floor where we live and work. While searching for a solution to this timeless problem, Avedon Engineering developed the AIRIUS System and tested it for two years in its own 160,000 square foot factory in Colorado. The results were beyond impressive -- heating bills were reduced by over 35%! In a building with a 30-foot ceiling there is approximately a 15°F temperature difference between the floor and the ceiling. With higher ceilings it is even more. That means to generate the heat necessary to maintain a comfortable 68°F temperature at the floor level, where people work, the ceiling will be a toasty 83°F or higher. Unless you have a good reason to heat the ceiling, and we can't think of one, that is a huge waste of energy and money. Within 24 hours after installing the AIRIUS System in that same building, the temperatures floor to ceiling will now be within 3°F. Best of all, the thermostats, previously set at 80° F, located on the ceiling mounted forced air furnaces have been lowered by 12°F. According to the U.S. Department of Energy, every degree the thermostat is lowered equals a 3% energy savings. This reduction in energy consumption can easily represent a savings of 35% or more in energy costs during the the air and floor where people live and work.

Parasoleil

Parasoleil was founded in 2001 in Boulder, Colorado as an Architectural Metals company by artist, Uriah Bueller. Honesty, Equality, Creativity, and Excellence are the core values of Parasoleil as it continues to expand. As an artist first and a manufactur ...

SSHC, Inc.

magine the comfort you feel standing outside on a warm, sunny day. That’s how customers describe the luxurious warmth of ENERJOY Radiant Heatmodules®. Not only do they enjoy clean, quiet, sunlike heat, but they appreciate ENERJOY’s significant energy savings.Documented by the Department of Energy and the National Association of Homebuilders, ENERJOY I electric radiant ceiling heat saves 20-50% over oil, gas or other electric systems. In addition, the ceiling panels use less energy than concealed electric or hydronic radiant systems, and are perfect partners for solar, photovoltaic or wind power sources. Green ENERJOY radiant Heatmodules have a low ‘carbon footprint’; they have life-of-the-building longevity and are fully recyclable.At SSHC, our goal is to produce and distribute the most efficient electric radiant heating systems available for ceilings, walls, floors and snowmelting applications plus a broad selection of controls appropriate for each system. The company has been awarded the E Seal Certificate of Recognition for leadership in marketing, the nation's highest energy and environmental criteria as an E Seal partner.

DuctSox Corporation

DuctSox Corporation, headquartered in Dubuque, Iowa, is a manufacturer of fabric air dispersion systems. DuctSox Systems are used to distribute and disperse air in open ceiling architecture, are cost effective and can be an aesthetically attractive altern ...

High-R Inc.

HIGH-R Inc. develops, markets, and installs innovative wall/ceiling insulation products that meet the performance, environmental, and budgetary needs of building owners, building managers, architects, and builders. Our mission is to constantly seek better materials and services to enable our customers to produce the best possible construction projects. Our commitment to you is customer satisfaction. We want each contact with HIGH-R to be an experience you will want to repeat. The HIGH-R® Insulated Ceiling and Wall System has revolutionized the way you insulate metal frame buildings. THE HIGH-R solution uses purlin clips to attach rigid ceiling or wall panels to edge trim, and then fills the cavity with blown-in insulation. FDA approved GSA approved (GSA Contract Number: GS-07F-0215U) HIGH-R is registered under U.S. Patent # 6,330,779BI

Accurate Perforating

The accel-E® Steel Thermal Efficient Panel (S.T.E.P.) wall system combines the strength of cold-formed steel framing with the insulation properties of expanded polystyrene (EPS). The result… a thermally resistant, high performance building system that’s strong, light in weight and energy efficient. Manufactured by ACCELERATED Building Technologies, LLC, the accel-E® STEP wall system offers a host of advantages over conventional building techniques including energy efficiency, faster installation time, labor savings, and more. If you want to add greater construction efficiency and exceptional “green” value to your next project, then it’s time to learn more about the accel-E® STEP wall system.

Big Ass Fans

Energy and Atmosphere Prereq 3 - Zero use of CFC-based refrigerants or if reusing equipment, phase out existing CFC-based equipment. Credit 4 - Do not use refrigerants or select refrigerants that minimize/eliminate the emission of compounds that contribu ...

Gordon, Inc.

Gordon, Inc. was founded in Shreveport, Louisiana, 1964. Since then, the company has grown to 100+ employees, with a state-of-the-art manufacturing facility utilizing over 226,000 square feet, and supported by over 70 independent agents worldwide. Gordon specializes in decorative metal ceilings, engineered ceiling systems and wall systems for commercial, industrial and institutional applications. Gordon’s exceptional growth and success has been guided by strategic growth plans which combine (1) expansion of existing markets, (2) development of new and unique products, as well as (3) new business and product acquisitions. Clestra Cleanroom Components was acquired, leading to corporate reorganization which created Gordon's Cleanroom Products Division. In 2001, Gordon acquired ALPRO® 425. In 2006, Gordon entered into the Custom Machine and Tool market with the creation of Gordon Machine and Tool Division. Gordon’s most recent acquisition occurred in 2007, when Gordon purchased the metal security ceilings systems marketed under the names Lockdown® and Cel•Line®, from Environmental Interiors, Inc.

Clearline Environmental Products

C-Port: a complete support system for conduit, pipe, HVAC equipment and ductwork. Made from recycled rubber, C-port are non penetrating and provide an environmentally friendly solution for all your rooftop support requirements.

Duo-Gard Industries

Duo-Gard is celebrating 25 years of innovation. Why should you care? And admit it: aren't you tired of the word "innovation"? We were too. Until we tried to find a better one to describe Duo-Gard's first 25 years. We gave up. So...here's the elevator spee ...

Nystrom

Nysan Solar Control solutions provide architects the tools to meet the demanding expectations of today's sustainable performance buildings. No other source offers the complete comprehensive solar control systems from manual and automated roller shades, to ...

Pinta Acoustic, Inc.

pinta acoustic, inc. provides acoustical and noise control solutions for the broadcast/audio, educational, architectural and facilities industries. Our products feature proprietary exclusive willtec® material, a porous melamine, which has exceptional sound absorbing capabilities and is Class 1(A) fire-rated. pinta brand names include SONEX® Panels and Baffles, PROSPEC® Barriers and Composites, CONTOUR® Tiles, SQUARELINE® Metal Ceiling Tiles, HARMONI Ceiling Tiles, BIOLINE™ Wood Ceiling Tiles, FABRITEC Wall Panels, WHITELINE® Ceiling Tiles and Ceiling Grid Systems.

Steel Ceilings Inc

For more than 50 years, Steel Ceilings has provided architects, building owners and contractors with industry-renowned service for its reliable line of standard and custom metal ceiling systems. Our products, which are made in the USA, are largely constructed of recycled, environmentally friendly materials, which are accepted back by us for recycling. The innovative design, strength and quality of our work enhance many of the world’s most prominent structures.

Contact Industries

Our company's history spans more than 60 years, and yet our strategic focus has always been to create innovative engineered wood products while making the most efficient use of wood resources. Early in our company's history, employees of our organization observed the year over year changes in log diameter and raw material quality causing us to think, develop, and invest in new technologies. It evolved into a philosophy of innovation by necessity, and as a result, our organization pioneered advances in finger-joint technology and wood veneer processing and application. We’ve co-developed patented processes for advanced 423s and become experts in high-performance finishes. Today our designs and technologies are part of many doors and windows sold today. Top name window and door manufacturers have come to rely on us for crafted component parts. Homebuilders, remodelers, architects and interior designers look to us for innovative, resource-wise solutions.